2014 Flex Workshop Manual

SECTION 501-03: Body Closures	2014 Flex Workshop Manual
REMOVAL AND INSTALLATION	Procedure revision date: 05/02/2013

Pinch Strip Switch

NOTE: Left side shown, right side similar.

Item	Part Number	Description
1	—	Liftgate
2		Pinch strip electrical connector
3	42430B	Pinch strip switch
4	—	Pushpin retainers (part of 42430B) (3 required)
5	—	Scrivet (part of 42430B)

Removal and Installation

Remove the liftgate trim panel. For additional information, refer to Section 501-05 .

Disconnect the pinch strip electrical connector.

Remove the pinch strip.
- Remove the pin-type retainers.
- Remove the grommet and route the harness out of the vehicle.

To install, reverse the removal procedure.