B-Pillar Trim Panel

Removal and Installation

Lower trim panel

1. Remove the front door scuff plate.
   • Pull upward on the scuff plate to release the clips.

2. Remove the rear door scuff plate.
   • Pull upward on the scuff plate to release the clips.

3. Remove the lower B-pillar trim panel.
   • Pull outward on the trim panel to release the clips.

Upper trim panel

4. NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.

   Remove the safety belt D-ring cover.

5. Remove the safety belt D-ring bolt.
   • To install, tighten to 40 Nm (30 lb-ft).

6. Remove the upper B-pillar trim panel bolt and remove the upper B-pillar trim panel.

All trim panels

7. NOTICE: To avoid damage to the B-pillar trim panels, remove any retaining clips from the body and attach them to the scuff plate trim panel before installing.

   To install, reverse the removal procedure.