SECTION 501-05: Interior Trim and Ornamentation
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

C-Pillar Trim Panel

Removal

NOTE: Removal steps in this procedure may contain installation details.

All vehicles

Vehicles without inflatable safety belts

    1. -
      • To install, tighten to 40 Nm (30 lb-ft).

Vehicles with inflatable safety belts

  1. NOTE: Follow the unique instructions or graphic for this step in installation.

  1. NOTE: Follow the unique instructions or graphic for this step in installation.

All vehicles

Installation

All vehicles

  1. NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining clips from the body and attach them to the C-pillar trim panel before installing.

    To install, reverse the removal procedure.

Vehicles with inflatable safety belts

    1. NOTE: The secondary safety belt web loop must be positioned down to prevent twisting of the safety belt.

  1. NOTE: Make sure the pin is pushed all the way in and the spring clip is allowed to ride up on the shoulder of the pin.

  1. NOTE: If the pin is not pushed all the way in, the lower safety belt tongue cover will not close correctly.