SECTION 501-05: Interior Trim and Ornamentation
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Door Trim Panel — Front


Item Part Number Description
1 W708412 Front door trim panel rear screw
2 13B755 Front door trim panel reflector
3 7423943 LH/ 7423942 RH Front door trim panel
4 W708412 Front door trim panel screws (4 required)
5 W505424 Front door trim panel center screw
6 7424056 Front door trim panel center screw cover
7 7422621 LH/ 7422620 RH Front door inside door handle screw cover
8 W505424 Front door inside door handle screw
9 7422601 LH/ 7422600 RH Front door inside door handle assembly
10 14528 LH/ 14527 RH Front door window control switch
11 W714296 Front door trim panel bumper screw

Removal and Installation

  1. Remove the front door trim panel reflector and remove the front door trim panel rear screw.
  1. Remove the front inside door handle screw cover.
  1. Remove the front inside door handle screw.
  1. Remove the door trim panel center screw cover.
  1. Remove the door trim panel center screw.
  1. Remove the 4 front door trim panel screws.
  1. Remove the window control switch. For additional information, refer to Section 501-11 .
  1. Remove the front door trim panel bumper screw.

  1. NOTICE: Avoid pulling directly on the upper rear corner (vinyl portion) of the door trim panel during removal to prevent damage to the door trim panel.

    Remove the front door trim panel.
  1. To install, reverse the removal procedure.