SECTION 501-05: Interior Trim and Ornamentation
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Door Trim Panel — Rear


Item Part Number Description
1 13B755 Rear door trim panel reflector
2 W708412 Rear door trim panel rear screw
3 W713297 Rear door trim panel pin-type retainer (2 required)
4 7427407 LH/ 7427406 RH Rear door trim panel
5 W708412 Rear door trim panel screws (4 required)
6 W505424 Rear door trim panel center screw
7 274B44 Rear door trim panel center screw cover
8 14528 LH/ 14527 RH Rear door window control switch
9 7422620 RH/ 7422621 LH Rear door inside handle screw cover
10 W505424 Rear door inside handle screw
11 7422601 LH/ 7422600 RH Rear door inside handle

Removal and Installation

  1. Remove the rear door trim panel reflector and remove the rear door trim panel screw.
  1. Remove the rear door inside door handle screw cover.
  1. Remove the rear door inside door handle screw.
  1. Remove the rear door trim panel center screw cover.
  1. Remove the rear door trim panel center screw.
  1. Remove the 4 rear door trim panel screws.

  1. NOTICE: Avoid pulling directly on the upper rear corner (vinyl portion) of the door trim panel during removal to prevent damage to the door trim panel.

    Remove the rear door trim panel.

  1. NOTICE: To avoid damage to the door trim panel, remove any retaining clips from the door and attach them to the door trim panel before installing.

    To install, reverse the removal procedure.