2014 Flex Workshop Manual

SECTION 501-05: Interior Trim and Ornamentation	2014 Flex Workshop Manual
REMOVAL AND INSTALLATION	Procedure revision date: 05/02/2013

Liftgate Trim Panel

NOTE: Power liftgate shown, manual liftgate similar.

Item	Part Number	Description
1	42410	Liftgate upper trim panel
2	W710338	Liftgate upper trim panel clip
3	W709995	Liftgate lower trim panel pin-type retainer
4	40704	Liftgate lower trim panel
5	—	Liftgate lower trim panel retainer screw cover (part of 40704)
6	—	Liftgate lower trim panel retainer screw (part of 40704)

Removal and Installation

Vehicles with a power liftgate

All vehicles

Remove the liftgate upper trim panel.
- Pull the liftgate upper trim panel toward the middle of the liftgate window glass to release the retaining clips.

Remove the liftgate lower trim panel retainer screw covers.

Remove the 4 liftgate lower trim panel retainer screws.

Remove the liftgate lower trim panel.
- Pull outward on the liftgate lower trim panel to release the pin-type retainers.

NOTICE: To avoid damage to the liftgate trim panel, remove any retaining clips from the liftgate and attach them to the liftgate trim panel before installing.
To install, reverse the removal procedure.