SECTION 501-08: Exterior Trim and Ornamentation
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Applique — Upper, Front Door

Removal and Installation

  1. Release the pin-type retainer and reposition the front of the door seal.
  1. Release the upper window applique front pin-type clip from the door.
  1. Remove the screw from the upper window applique.
  1. Release the 2 pin-type retainers from the rear of the door seal.
  1. Release the upper window applique pin-type retainer.

  1. NOTE: Before installing the new applique, clean the window applique mounting area with an appropriate alcohol-based cleaner and install new double-sided tape to the applique.

    Pull outward on the upper window applique to release the 2-sided tape from the door.
  1. To install, reverse the removal procedure.