Applique — Rear, Front Door

Removal and Installation

NOTE: The applique is a one-time use only part. A new applique must be installed if removed.

Appliques with keyless entry keypad

1. Remove the front door trim panel. For additional information, refer to Section 501-05 .

2. Disconnect the keyless entry keypad electrical connector.

All vehicles

3. Release the window applique-to-door retaining clips.

4. Remove and discard the window applique.
   • Pull gently on applique, starting at the top and release the window moulding pressure-sensitive tape from the door.

5. NOTE: Before installing the new window applique, clean the window moulding mounting area with an appropriate alcohol-based cleaner.

   Make sure all the old pressure-sensitive tape is removed from the window applique mounting area.

6. To install, reverse the removal procedure.