SECTION 501-08: Exterior Trim and Ornamentation
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Applique — Upper, Rear Door

Removal

  1. NOTE: The rear door upper applique is held on by double-sided tape.

    Starting at the forward edge of the applique, insert a suitable removal tool between the applique and the door frame.
  1. Determine the location of the double-sided tape. Carefully spread spray-on adhesive cleaner down the space between the rear door upper applique and the door frame. Allow the cleaner to set for several minutes.
  1. Begin removing the rear door upper applique, spraying additional adhesive cleaner as needed.

Installation

  1. Remove all remaining adhesive tape on the mating surfaces of the door and apply new adhesive tape.
  1. Install the rear door upper applique.