SECTION 501-08: Exterior Trim and Ornamentation
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Roof Rack


Item Part Number Description
1 55115 LH/ 55114 RH Roof rack assembly
2 50002 Roof rack assembly bracket
3 — Roof rack assembly clip (part of 55115 LH/ 55114 RH)
4 551A47 LH/ 55A146 RH Roof rack assembly front cover
5 55183 LH/ 55182 RH Roof rack assembly rear cover
6 W712668 Roof rack assembly screws (3 required)
7 W713232 Roof rack assembly mounting bracket screws (2 required)
8 N621926 Roof rack assembly nut

Removal and Installation

  1. Remove the roof rack assembly front and rear bolt covers.
  1. Remove the roof rack assembly screws.
  1. Remove the A-pillar trim panel. For additional information, refer to Section 501-05 .
  1. Remove the sun visor retainer screws and reposition the sun visor.
  1. Disconnect the sun visor electrical connector.
  1. Remove the sun visor clip screw and remove the sun visor clip.
  1. Lower the front of the headliner to access the roof rack assembly front nut.
  1. Remove the roof rack assembly nut.

  1. NOTE: Using a non-marring tool, pry up from the outside of the roof rack assembly towards the inside, to release the roof rack assembly from the clips.

    Remove the roof rack assembly.
  1. To install, reverse the removal procedure.