Exterior Mirror

Removal and Installation

NOTE: Do not remove the exterior mirror assembly when repairing an individual part. Individual components can be installed without removing the exterior mirror.

1. Remove the door trim panel. For additional information, refer to Section 501-05 .

2. Disconnect the exterior mirror electrical connector.

3. Remove the 2 exterior mirror nuts.
   • To install, tighten to 9 Nm (80 lb-in).

4. Remove the exterior mirror bolt.
   • To install, tighten to 12 Nm (106 lb-in).

5. Remove the exterior mirror.

6. To install, reverse the removal procedure.