Seat Track — Front

Removal and Installation

NOTE: Driver seat shown, passenger seat similar.

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the seat backrest. Refer to Seat Backrest — Front .

5. To install, reverse the removal procedure.
   • If equipped with memory seats, operate the seat track in all directions to set the soft stops.
     • Operate the seat track horizonal motor in one direction until it stops. Press the switch a second time in the same direction and hold for one second to set the soft stop.
     • Repeat the steps for the horizonal motor in the opposite direction and with all other seat motors in both directions to set the remaining soft stops.