Seat Backrest — Second Row, 40 Percent

Removal and Installation

 WARNING: Keep hands clear of all moving seat mechanisms when releasing the recliner lever. The recliners are spring loaded and release with high force. Failure to follow these instructions may result in serious personal injury.

NOTE: For parts identification and location, refer to Seat — Exploded View, Second Row in this section.

1. Release the backrest cover J-clips.

2. If equipped with heated seats, follow the heated seat mat wire harness up the backrest, disconnect the electrical connector and detach the wire harness retainer.

3. Remove the 4 recliner-to-backrest frame bolts.
   • To install, tighten to 48 Nm (35 lb-ft).

4. To install, reverse the removal procedure.