Seat Backrest Cover — Second Row, 40 Percent

Removal and Installation

NOTE: For parts identification and location, refer to Seat — Exploded View, Second Row in this section.

1. Remove the 2 head restraint guides sleeves. For additional information, refer to Head Restraint Guide Sleeve in this section.

2. Release the backrest cover J-clips.

3. NOTICE: Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.

   Remove the hog rings, separate the hook-and-loop strips, invert the backrest cover all the way up and remove.

4. To install, reverse the removal procedure.