Seat Backrest Cover — Third Row, Power

Removal and Installation

1. Remove the affected seat backrest. For additional information, refer to Seat Backrest — Third Row, Power in this section.

2. Release the backrest cover upper J-clip under the head restraint.

3. NOTICE: Use care when separating the backrest cover from the hook-and-loop strips, or the hook-and-loop strips may be torn from the backrest foam pad.

   Separate the hook-and-loop strips, invert the backrest cover all the way up and remove.
   • At installation, feed the straps back through the backrest cover.

4. To install, reverse the removal procedure.