SECTION 501-12: Instrument Panel and Console
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Refrigerator Switch


Item Part Number Description
1 14D468 Refrigerator switch
2 061B38 Refrigerator switch bezel
3 — Refrigerator switch electrical connector

Removal and Installation

  1. NOTICE: When prying on a component, a non-marring tool must be used or damage to the component may occur.

    With a non-marring tool, gently pry the refrigerator switch bezel slightly outward to access the 3 retaining tabs on the refrigerator switch bezel.
  1. Using a small flat blade screwdriver, gently press the 3 refrigerator switch bezel retaining tabs inward at the locations shown, while pulling the refrigerator switch bezel outward.
  1. Remove the refrigerator switch and bezel.
  1. Separate the refrigerator switch from the refrigerator switch bezel.
  1. To install, reverse the removal procedure.