SECTION 501-12: Instrument Panel and Console
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Refrigerator

Rear console

Item Part Number Description
1 04567 Front finish panel
2 045A90B Bottom panel
3 13562B Top trim panel
4 14D468 Refrigerator switch assembly
5 W505153 Panel screws (6 required)
6 045A90A Top panel
7 06024 Rear armrest
8 W505153 Refrigerator screws (6 required)
9 044672 Refrigerator lid
10 045A36 Refrigerator
11 045C22 Side finish panel
12 045E24 Rear finish panel

Removal and Installation

  1. Remove the rear floor console. For additional information, refer to Console — Rear, Floor in this section.
  1. Remove the rear armrest.
  1. Remove the rear finish panel.
  1. Remove the refrigerator switch assembly.
  1. Remove the 4 top trim panel screws.
  1. Remove the side finish panel by sliding the panel towards the rear.
  1. Separate the upper and lower console inner structure panels by removing the 6 screws on each side.
  1. Remove the two torx screws from the lower rear of the refrigerator.
  1. Remove the six torx screws from the refrigerator.
  1. Remove the refrigerator.
  1. To install, reverse the removal procedure.