SECTION 501-14A: Handles, Locks, Latches and Entry Systems — Without Intelligent Access (IA)
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Liftgate Release Switch


Item Part Number Description
1 W709393 Liftgate moulding bolts (2 required)
2 — Liftgate release switch electrical connector (part of 14A583)
3 13508 Liftgate moulding
4 14018 Liftgate release switch

Removal and Installation

  1. Remove the liftgate trim panel. For additional information, refer to Section 501-05 .
  1. Disconnect the liftgate moulding electrical connector.
  1. Remove the 2 bolts and the liftgate moulding.
  1. Press the tabs and remove the liftgate release switch.
  1. To install, reverse the removal procedure.