2014 Flex Workshop Manual

SECTION 501-14B: Handles, Locks, Latches and Entry Systems — With Intelligent Access (IA)	2014 Flex Workshop Manual
REMOVAL AND INSTALLATION	Procedure revision date: 05/02/2013

Hood Latch

NOTE: Radiator grille shown removed for clarity.

Item	Part Number	Description
1	N808727	Hood latch bolts (2 required)
2	16700	Hood latch
3	16916	Hood latch release cable
4	N807658	Hood latch striker bolts (2 required)
5	16K689	Hood latch striker

Removal and Installation

NOTE: Mark the position of the hood latch prior to removing the hood latch bolts.
Remove the 2 bolts and position the hood latch aside to gain access to the hood latch release cable.
- To install, tighten to 11 Nm (97 lb-in).

Disconnect the hood latch release cable and remove the hood latch.

To install, reverse the removal procedure.
- When the hood latch is installed, the latch adjustment must be checked to make sure the latch is aligned correctly.