SECTION 501-16: Wipers and Washers
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Wiper Motor — Rear Window

Removal and Installation

  1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm — Rear in this section.
  1. Remove the liftgate trim panel. For additional information, refer to Section 501-05 .
  1. Remove the rear window wiper motor assembly.
    1. Remove the 3 rear window wiper motor assembly bolts.
      • To install, tighten to 8 Nm (71 lb-in).
    1. Disconnect the rear window wiper motor assembly electrical connector and remove the wiper motor assembly.
  1. To install, reverse the removal procedure.