SECTION 501-16: Wipers and Washers
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Wiper Blade — Rear

Removal

NOTICE: Lifting the wiper arm beyond its maximum angle may result in damage to the wiper arm or the wiper arm heel.

NOTICE: Allowing the wiper arm to contact the glass may result in damage to the glass.

  1. Hold the wiper arm with one hand close to the wiper arm and wiper blade pivot joint and lift the arm to its maximum angle.
  1. Hold the primary structure of the wiper blade with the other hand close to the wiper arm and wiper blade pivot joint.
  1. Tightly grip and push on the wiper arm and wiper blade joint from beneath and separate the blade from the arm.

Installation

  1. Attach the new wiper blade on the wiper arm and press it into place until a snap is heard.