SECTION 501-16: Wipers and Washers
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Washer Pump


Material
Item Specification
Premium Quality Windshield Washer Fluid (Canada)
CXC-37-(A, B, D, and F) (Canada) 		—
Premium Windshield Washer Concentrate (US)
ZC-32-A or B (US) 		WSB-M8B16-A2

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Remove the RH front fender splash shield. For additional information, refer to Section 501-02 .

  1.  WARNING: Carefully read cautionary information on product label. For emergency medical information seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.

    NOTE: When installing a new washer pump, be careful not to damage the rubber grommet.

    NOTE: To prevent spilling washer fluid, drain the washer reservoir before washer pump removal.

    Remove the washer pump.

  1. NOTICE: Do not operate the washer pump prior to filling the washer reservoir. Failure to follow this instruction may result in premature pump failure.

    To install, reverse the removal procedure.