SECTION 501-17: Roof Opening Panel
| 2014 Flex Workshop Manual
|
REMOVAL AND INSTALLATION
| Procedure revision date: 05/02/2013
|
NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system, including: whenever the roof opening panel motor has been removed from the roof opening panel system, the roof opening panel glass has been removed from the roof opening panel system, the roof opening panel assembly has been removed from the vehicle, a new roof opening panel motor has been installed, a new roof opening panel glass has been installed or a new roof opening panel assembly has been installed. For additional information, refer to Roof Opening Panel Motor Initialization in this section.
NOTE: Roof opening panel with rear entertainment system shown, roof opening panel without rear entertainment system similar.
| Item | Part Number | Description |
|---|---|---|
| 1 | — | Roof opening panel glass screw (4 required) |
| 2 | 500A18 | Roof opening panel glass |
| 3 | 500A26 | Air deflector assembly |
| 4 | — | Air deflector assembly spring (part of air deflector assembly) |
| 5 | W711267 | Roof opening panel motor screw (3 required) |
| 6 | 15790 | Roof opening panel motor |
| 7 | — | Roof opening panel end cap (part of roof opening panel frame assembly) |
| 8 | 519A02 | Roof opening panel shield |
| 9 | 54022 | Trough assembly |
| 10 | 500A66 | Concertina blind (2 required) |
| 11 | W702928 | Roof opening panel frame bolt (12 required) |
| 12 | 51070 | Roof opening panel frame assembly |
| 13 | 51884 | Weatherstrip |
| 14 | — | Family entertainment system bracket (if equipped) (part of roof opening panel frame assembly) |