Roof Opening Panel Shield

Removal and Installation

1. Remove the roof opening panel glass. For additional information, refer to Roof Opening Panel Glass in this section.

2. Slide the roof opening panel shield forward halfway.

3. Disengage the roof opening panel shield guide feet.
   • Lift the front portion of the roof opening panel shield upward at center until able to disengage one of the front guide feet.

4. With one of the guide feet released, carefully rotate the roof opening panel shield in a clockwise manner to disengage the remaining guide feet.

5. To install, reverse the removal procedure.
   • Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization in this section.