Bumper Cover — Front

Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .

2. Remove the upper radiator grille. For additional information, refer to Section 501-08 .

4. NOTE: The lower air deflector will be removed with the front bumper cover.

5. • Three screws each side.
   • One pin-type retainer each side.

6. If equipped.

7. NOTE: The rearward upper portion of the bumper cover must be pulled outward to release it from the bumper cover mounting reinforcement.

9. If necessary.

Installation

1. To install, reverse the removal procedure.
   • Transfer all necessary components.