Adhesives

 WARNING: Always refer to Material Safety Data Sheet (MSDS) when handling chemicals and wear protective equipment as directed. Examples may include but are not limited to respirators and chemically resistant gloves. Failure to follow these instructions may result in serious personal injury.

 Material

Adhesives are used in a variety of applications. Typical uses for adhesives include roof panels, and quarter panels. Trim applications include body side mouldings, emblems and weatherstripping. Combination sealer/adhesives are also used. Surface preparation is critical to a high quality repair. Following the label instructions for the product is essential.

Work in a well-ventilated area and protect adjacent surfaces when working with adhesives. The use of eye protection and protective clothing is also recommended when working with adhesives. Carry out a trial fit, mark and align the surfaces before bonding the materials together.

Seam sealers and corrosion protection may be necessary once the adhesive(s) has cured, depending on the application. The following is a list of adhesives recommended for certain types of applications:

• Metal Bonding Adhesive — For bonding cold-rolled steel, galvanized steel, aluminum and correctly prepared E-coat. It is used for roof panel replacement and OEM structural adhesive replacement.
• Plastic Bonding Adhesive — For bonding a variety of plastics to plastics and plastics to primed, painted or E-coated metals. Also for general purpose bonding of trim components.
• Trim and Weatherstrip Adhesive — For use on body side moulding, emblems, trim, bumper impact strips and carpeting.
• Clear Silicone Rubber — Used for sealing water leaks, noise concerns, remounting trim and repairing torn weatherstripping.

NOTE: The following illustration(s) identify structural adhesive location(s).

Body Side Outer-to-Inner

NOTE: Adhesive is applied between the body side outer and inner panel. Left side shown, right side similar.

Rear Inner Wheelhouse Reinforcement

NOTE: Left side shown, right side similar.

Door Assembly

NOTE: Left side shown, right side similar.