2014 Flex Workshop Manual

SECTION 502-00: Uni-Body, Subframe and Mounting System	2014 Flex Workshop Manual
DESCRIPTION AND OPERATION	Procedure revision date: 05/02/2013

The front subframe is bolted to the body and:

aids in structural support.
provides the mounting surface for the steering gear, the front suspension lower arms, engine roll restrictor, stabilizer bar and power steering return lines.
front subframe bushings are serviceable.

The rear subframe is bolted to the body and:

aids in structural support.
provides the mounting surface for the rear suspension upper control arms, rear suspension lower control arms and (if equipped) a mounting location for the rear differential.

For body dimension specifications, refer to Section 501-35 .