SECTION 303-00: Engine System — General Information
2014 Flex Workshop Manual
GENERAL PROCEDURES
Procedure revision date: 05/02/2013

Crankshaft End Play


Special Tool(s)
Dial Indicator Gauge with Holding Fixture
100-002 (TOOL-4201-C) or equivalent

NOTE: Refer to the appropriate Section 303-01 for the specification.

  1. Install the Dial Indicator Gauge with Holding Fixture.
  1. Position the crankshaft to the rear of the cylinder block.
  1. Zero the Dial Indicator Gauge.
  1. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.