SECTION 303-01A: Engine — 3.5L Ti-VCT
2014 Flex Workshop Manual
IN-VEHICLE REPAIR
Procedure revision date: 05/02/2013

Flexplate

Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Remove the transaxle. For additional information, refer to Section 307-01 .
  1. Remove the 8 bolts and the flexplate.

Installation

  1. NOTE: One of the 8 flexplate holes are offset so the flexplate can only be installed in one position.

    Install the flexplate and the 8 bolts.
  1. Install the transaxle. For additional information, refer to Section 307-01 .
  1. After completing the repairs, use the scan tool to perform the Misfire Monitor Neutral Profile Correction procedure following the on-screen instructions.