SECTION 303-01A: Engine — 3.5L Ti-VCT
2014 Flex Workshop Manual
IN-VEHICLE REPAIR
Procedure revision date: 05/02/2013

Oil Pump Screen and Pickup Tube

Removal

NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan may cause engine failure.

  1. Remove the oil pan. For additional information, refer to Oil Pan in this section.
  1. Remove the 2 bolts and the oil pump screen and pickup tube.

Installation

  1. Using a new O-ring seal, install the oil pump screen and pickup tube and the 2 bolts.
  1. Install the oil pan. For additional information, refer to Oil Pan in this section.