SECTION 303-01B: Engine — 3.5L GTDI
2014 Flex Workshop Manual
IN-VEHICLE REPAIR
Procedure revision date: 05/02/2013

Flexplate


Special Tool(s)
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool

Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Remove the transaxle. For additional information, refer to Section 307-01 .
  1. Remove the 8 bolts and the flexplate.

Installation

  1. NOTE: One of the 8 flexplate holes are offset so the flexplate can only be installed in one position.

    Install the flexplate and the 8 bolts.
  1. Install the transaxle. For additional information, refer to Section 307-01 .
  1. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.