2014 Flex Workshop Manual

SECTION 303-01B: Engine — 3.5L GTDI	2014 Flex Workshop Manual
IN-VEHICLE REPAIR	Procedure revision date: 05/02/2013

Engine Oil Pressure (EOP) Switch

Material
Item	Specification
Motorcraft® Thread Sealant with PTFE TA-24	WSK-M2G350-A2

Item	Part Number	Description
1	14A464	Engine Oil Pressure (EOP) switch electrical connector (part of 12C508)
2	9278	EOP switch

Removal and Installation

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .

Disconnect the Engine Oil Pressure (EOP) switch electrical connector.

Remove the EOP switch.
- To install, tighten to 14 Nm (124 lb-in) plus an additional 180 degrees.

To install, reverse the removal procedure.
- Apply thread sealant with PTFE to the EOP switch threads prior to installation.