SECTION 303-03: Engine Cooling
2014 Flex Workshop Manual
SPECIFICATIONS
Procedure revision date: 05/02/2013


Material
Item Specification Fill Capacity
Motorcraft® Premium Cooling System Flush
VC-1
ESR-M14P7-A
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)
XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)
WSS-M2C945-A
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-30 Super Premium Motor Oil (Canada)
XO-5W30-QSP (US); CXO-5W30-LSP12 (Canada); or equivalent
WSS-M2C946-A, 5W30;
Motorcraft® Orange Antifreeze/Coolant Concentrated
VC-3-B (US); CVC-3-B2 (Canada)
WSS-M97B44-D 3.5L Ti-VCT without trailer tow package — 12.4L (13.1 qt) a ; 3.5L Ti-VCT with trailer tow package — 12.7L (13.4 qt) a ; 3.5L GTDI — 12.9L (13.6 qt) a
Motorcraft® Orange Antifreeze/Coolant Prediluted
VC-3DIL-B (US); CVC-3DIL-B (Canada)
WSS-M97B44-D2 3.5L Ti-VCT without trailer tow package — 12.4L (13.1 qt); 3.5L Ti-VCT with trailer tow package — 12.7L (13.4 qt); 3.5L GTDI — 12.9L (13.6 qt)
Thread Sealant with PTFE
TA-24
WSK-M2G350-A2
a 50/50 mixture coolant and distilled water.


  General Specifications

Item Specification
Pressure Tests
Complete cooling system maximum pressure 96 kPa (14 psi)
Pressure relief cap 96 kPa (14 psi)
Radiator (out of vehicle) 138 kPa (20 psi)
Thermostat Opening Temperatures
Starts to open 79.5-83.3°C (175-182°F)
Fully open 94.5°C (202°F)



  Torque Specifications

Description Nm lb-ft lb-in
A/C condenser-to-Charge Air Cooler (CAC) bolts 6 53
A/C condenser-to-radiator bolts 6 53
Block heater 40 30
CAC adapter bolts 8 71
CAC outlet pipe clamps 5 44
CAC -to-radiator bolts 6 53
CAC tube clamps 5 44
Camshaft sprocket bolt a
Coolant inlet connection bolts 10 89
Coolant pump bolts a
Coolant pump pulley bolts a 20 177
Cooling fan motor and shroud bolts 6 53
Degas bottle bolts 9 80
Engine oil filter b
KS bolt 20 177
Oil pan drain plug 27 20
Primary timing chain guide bolts 10 89
Primary timing chain tensioner bolts 10 89
Thermostat housing bolts - 3.5L Ti-VCT a
Transaxle shift cable bracket bolts 12 106
Turbocharger coolant tube banjo bolts 40 30
Turbocharger coolant tube-to-cylinder head bracket nut 10 89
Valve train oil tube bolts a
Variable Camshaft Timing (VCT) oil control solenoid housing bolts a
VCT bolts a
a Refer to the procedure.
b Tighten to 5 Nm (44 lb-in) plus an additional 180 degrees.