SECTION 303-03: Engine Cooling
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Thermostat — 3.5L GTDI


Material
Item Specification
Thread Sealant with PTFE
TA-24 		WSK-M2G350-A2

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Drain the cooling system. Refer to Cooling System Draining, Filling and Bleeding .
  1. Remove the ACL outlet pipe. Refer to Section 303-12 .
  1. Wire brush.
    Apply the substance from the specified tube.
  1. Visual check.

Installation

  1. To install, reverse the removal procedure.
  1. Fill and bleed the cooling system. Refer to Cooling System Draining, Filling and Bleeding .