SECTION 303-03: Engine Cooling
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Coolant Inlet Pipe — 3.5L Ti-VCT


Material
Item Specification
Motorcraft® Orange Antifreeze/Coolant Concentrated
VC-3-B (US); CVC-3-B2 (Canada) 		WSS-M97B44-D
Motorcraft® Orange Antifreeze/Coolant Prediluted
VC-3DIL-B (US); CVC-3DIL-B (Canada) 		WSS-M97B44-D2

Removal

  1. Remove the lower intake manifold. Refer to Section 303-01A .
  1. Discard the specified component. Follow local disposal regulations.

Installation

  1. NOTICE: Use Motorcraft® Orange Antifreeze/Coolant. Do not mix coolant types. Mixing coolant types degrades the coolant corrosion protection and may damage the engine or cooling system.

    Install new O-ring seals.
    Apply the specified lubricant to the specified component.
  1. Install the lower intake manifold. Refer to Section 303-01A .