SECTION 303-03: Engine Cooling
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013
Cooling Fan Motor and Shroud — 3.5L Ti-VCT
Removal
NOTE:
Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist. Refer to
Section 100-02
.
Remove the Air Cleaner (ACL) assembly. Refer to
Section 303-12
.
If equipped.
To install, tighten to 6 Nm (53 lb-in).
Installation
To install, reverse the removal procedure.
