Cooling Fan Motor and Shroud — 3.5L GTDI

Removal

NOTICE: Whenever turbocharger air intake system components are removed, always cover open ports to protect from debris. It is important that no foreign material enter the system. The turbocharger compressor vanes are susceptible to damage from even small particles. Inspect and if necessary clean all components prior to installation or reassembly.

1. With the vehicle in NEUTRAL, position it on a hoist. Refer to Section 100-02 .

2. Remove the Air Cleaner (ACL) assembly and the ACL outlet pipe. Refer to Section 303-12 .

12. If equipped.

Installation

1. • Tighten to 6 Nm (53 lb-in).

4. If equipped.

6. Install a new gasket
   • Finger tighten.

8. • Tighten to 8 Nm (71 lb-in).

9. • Tighten to 5 Nm (44 lb-in).

12. • Tighten to 8 Nm (71 lb-in).

13. • Tighten to 5 Nm (44 lb-in).

14. Install the ACL outlet pipe and the ACL assembly. Refer to Section 303-12 .