SECTION 303-08: Engine Emission Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Crankcase Vent Oil Separator — 3.5L GTDI


Item Part Number Description
1 6C658 Crankcase ventilation tube
2 — Crankcase ventilation tube-to-PCV valve quick connect coupling (part of 6C658)
3 6A785 Crankcase vent oil separator
4 14A163 Wire harness pin-type retainer
5 W701775 Crankcase vent oil separator bolt (3 required)
6 6582 RH valve cover

Removal and Installation

  1. Release the wire harness pin-type retainer from the crankcase vent oil separator.
  1. Disconnect the crankcase ventilation tube-to-PCV valve quick connect coupling. For additional information, refer to Section 310-00 .
  1. Remove the 3 crankcase vent oil separator bolts.
  1. Remove the crankcase vent oil separator from the RH valve cover.
  1. To install, reverse the removal procedure.