SECTION 303-14: Electronic Engine Controls
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Camshaft Position (CMP) Sensor — 3.5L GTDI


Material
Item Specification
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-30 Super Premium Motor Oil (Canada)
XO-5W30-QSP (US); CXO-5W30-LSP12 (Canada); or equivalent 		WSS-M2C946-A, 5W30;

NOTE: Lower radiator hose removed for clarity.


Item Part Number Description
1 14A464 RH CMP sensor electrical connector
2 W503275 RH CMP sensor bolt
3 12K073 RH CMP sensor
4 14A464 LH CMP sensor electrical connector
5 W503275 LH CMP sensor bolt
6 12K073 LH CMP sensor

Removal and Installation

Both sensors

  1. Remove the ACL outlet pipe and the ACL . Refer to Section 303-12 .

RH sensor

  1. Position the RH turbocharger intake tube aside. Refer to Section 303-12 .

LH sensor

  1. Position the LH turbocharger intake tube aside. Refer to Section 303-12 .

Both sensors

  1. Disconnect the CMP sensor electrical connector.
  1. Remove the bolt and the CMP sensor.

  1. NOTE: Lubricate the CMP sensor O-ring seal with clean engine oil.

    To install, reverse the removal procedure.