SECTION 303-14: Electronic Engine Controls
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Cylinder Head Temperature (CHT) Sensor — 3.5L GTDI


Item Part Number Description
1 14A464 Cylinder Head Temperature (CHT) sensor electrical connector
2 6G004 CHT sensor
3 W503274 Ground wire-to-engine front cover bolt
  1. Remove the Air Cleaner (ACL) outlet pipe and the ACL . For additional information, refer to Section 303-12 .
  1. Position the ACL -to-RH turbocharger intake tube aside. For additional information, refer to Section 303-12 .
  1. Remove the ground wire-to-engine front cover bolt.
  1. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.
  1. Remove and discard the CHT sensor.
  1. To install, reverse the removal procedure.