SECTION 303-14: Electronic Engine Controls
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Turbocharger Boost Pressure (TCBP) / Charge Air Cooler Temperature (CACT) Sensor


Material
Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)
XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) 		WSS-M2C945-A


Item Part Number Description
1 14A464 Turbocharger Boost Pressure (TCBP)/ Charge Air Cooler Temperature (CACT) sensor electrical connector
2 9F479 TCBP / CACT sensor
3 W506843 TCBP / CACT sensor screws

Removal

NOTE: Turbocharger Boost Pressure (TCBP)/ Charge Air Cooler Temperature (CACT)sensor and the Manifold Absolute Pressure (MAP)/Intake Air Temperature 2 (IAT2) sensor are not interchangeable.

  1. Disconnect the TCBP / CACT sensor electrical connector.
  1. Remove the 2 screws and the TCBP / CACT sensor.

Installation

  1. Lubricate the TCBP / CACT sensor O-ring seal with clean engine oil.
  1. Install the TCBP / CACT sensor and the 2 screws.
  1. Connect the TCBP / CACT sensor electrical connector.