SECTION 303-14: Electronic Engine Controls
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Manifold Absolute Pressure (MAP) / Intake Air Temperature 2 (IAT2) Sensor


Material
Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)
XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) 		WSS-M2C945-A


Item Part Number Description
1 W505565 Manifold Absolute Pressure (MAP)/ Intake Air Temperature 2 (IAT2) sensor screws
2 9F479 MAP / IAT2 sensor
3 14A464 MAP / IAT2 sensor electrical connector

Removal

NOTE: The Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT) sensor and the Manifold Absolute Pressure (MAP)/ Intake Air Temperature 2 (IAT2) sensor are not interchangeable.

  1. Disconnect the MAP / IAT2 sensor electrical connector.
  1. Remove the 2 screws and the MAP / IAT2 sensor.

Installation

  1. Lubricate the MAP / IAT2 sensor O-ring seal with clean engine oil.
  1. Install the MAP / IAT2 sensor and the 2 screws.
  1. Connect the MAP / IAT2 sensor electrical connector.