SECTION 206-00: Brake System — General Information
| 2014 Flex Workshop Manual
|
SPECIFICATIONS
| Procedure revision date: 05/02/2013
|
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid
PM-20 | WSS-M6C65-A2 and ISO 4925 Class 6 | — |
General Specifications
| Item | Specification |
|---|---|
| Brake Disc | |
| Front brake disc minimum thickness (325 mm (13 in) brakes) | 28.5 mm (1.122 in) |
| Front brake disc minimum thickness (352 mm (14 in) brakes) | 30 mm (1.181 in) |
| Rear brake disc minimum thickness (325 mm (13 in) brakes) | 10.0 mm (0.394 in) |
| Rear brake disc minimum thickness (352 mm (14 in) brakes) | 17.5 mm (0.689 in) |
| Brake Pads | |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Front caliper bleeder screw | 11 | — | 97 |
| Master cylinder brake tube fittings | 22 | 16 | — |
| Rear caliper bleeder screw | 10 | — | 89 |