Brake Caliper Anchor Plate

Removal

 WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in Section 100-00 . Failure to follow this instruction may result in serious personal injury.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: 352 mm (14 in) brakes shown, 325 mm (13 in) brakes similar.

1. Remove the brake pads. For additional information, refer to Brake Pads in this section.

2. Discard the specified component. Follow local disposal regulations.
   • To install, tighten to 103 Nm (76 lb-ft).

Installation

1. To install, reverse the removal procedure.