Brake Disc Shield

Removal

 WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in Section 100-00 . Failure to follow this instruction may result in serious personal injury.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: 352 mm (14 in) brakes shown, 325 mm (13 in) brakes similar.

1. Remove the wheel hub and bearing. For additional information, REFER to Section 204-02 .

2. • To install, tighten to 15 Nm (133 lb-in).

Installation

1. To install, reverse the removal procedure.