SECTION 206-09: Anti-Lock Brake System (ABS) and Stability Control
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Wheel Speed Sensor — Rear

NOTE: LH side shown, RH side similar.


Item Part Number Description
1 — Wheel speed sensor electrical connector (part of 2C190)
2 — Wheel speed sensor pin-type retainers (part of 2C190)
3 — Wheel speed sensor harness retainers (part of 2C190)
4 W505255 Wheel speed sensor bolt
5 2C190 Wheel speed sensor

Removal and Installation

  1. NOTICE: Make sure to correctly route and secure the wheel speed sensor harness in the rear subframe assembly or damage to the harness may occur.

    With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
  1. Disconnect the wheel speed sensor electrical connector.
  1. Detach the 2 wheel speed sensor pin-type retainers.
  1. Detach the 2 wheel speed sensor harness retainers.
  1. Remove the wheel speed sensor bolt.
  1. Remove the wheel speed sensor.
  1. To install, reverse the removal procedure.