SECTION 307-01: Automatic Transmission — 6F50/6F55
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Digital Transmission Range (TR) Sensor


Special Tool(s)
Installer, Manual Lever Retaining Pin
307-592
Remover, TRS Retaining Pin
307-696

Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Section 100-02 .
  1. Remove the main control valve body. Refer to Main Control Valve Body .
  1. Special tool(s): Remover, TRS Retaining Pin 307-696.

  1. NOTICE: Do not allow the park pawl actuator rod to slide out of the transmission case too far or it can become disengaged from the park pawl. Transmission removal and disassembly is required to install the park pawl actuator rod on the park pawl.

Installation

  1. Special tool(s): Installer, Manual Lever Retaining Pin 307-592.
  1. Install the main control valve body. Refer to Main Control Valve Body .
  1. Adjust the selector lever cable. Refer to Section 307-05 .