SECTION 307-01: Automatic Transmission — 6F50/6F55
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013

Halfshaft Seal — RH, Front Wheel Drive (FWD)


Special Tool(s)
Adapter for 303-224 (Handle)
205-153 (T80T-4000-W)
Cover Axle Seal Installer
307-582A

Material
Item Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid
XT-10-QLVC (US); CXT-10-LV12 (Canada) 		MERCON® LV

Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Section 100-02 .
  1. Remove the RH front wheel and tire. REFER to Section 204-04 .
  1. Remove the RH halfshaft. REFER to Section 205-04 .
  1. General equipment: Awl.
  1. General equipment: Dent puller.

Installation

  1. Special Tool(s): Cover Axle Seal Installer 307-582A and Adapter for 303-224 (Handle) 205-153 (T80T-4000-W).
    New halfshaft seal.
  1. Special Tool(s): Cover Axle Seal Installer 307-582A and Adapter for 303-224 (Handle) 205-153 (T80T-4000-W).
  1. Install the RH halfshaft. REFER to Section 205-04 .
  1. Install the RH wheel and tire. REFER to Section 204-04 .
  1. Fill with clean transmission fluid to the correct level.