SECTION 307-01: Automatic Transmission — 6F50/6F55
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 06/03/2013

Main Control Cover — 3.5L GTDI


Material
Item Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid
XT-10-QLVC (US); CXT-10-LV12 (Canada) 		MERCON® LV

Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Section 100-02 .
  1. Remove the ACL and outlet pipe. REFER to Section 303-12 .
  1. Section 310-00
  1. If equipped.
  1. Drain the transmission fluid.

  1. NOTE: Note the location of the of the studbolts for assembly.

Installation

  1. Check for damage. Visual check.

  1. NOTE: Install the studbolts in the correct locations as noted during disassembly.

    Loosely install the bolts.
  1. Tighten the main control cover bolts in the sequence shown.
  1. If equipped.
  1. Fill the transaxle with clean transmission fluid. Refer to Transmission Fluid Drain and Refill .
  1. Install the ACL and outlet pipe. REFER to Section 303-12 .