SECTION 307-01: Automatic Transmission — 6F50/6F55
2014 Flex Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 05/02/2013
Transaxle Support Insulator — Anti-Roll, 3.5L Ti-VCT
Material
Item
Specification
Motorcraft® Threadlock and Sealer
TA-25
WSK-M2G351-A5
Removal
With the vehicle in NEUTRAL, position it on a hoist. Refer to
Section 100-02
.
Remove the exhaust Y-pipe. Refer to
Section 309-00
.
Installation
Wire brush. Apply the substance from the specified tube.
Materials: Threadlock and Sealer TA-25.
Tighten to 103 Nm (76 lb-ft).
Tighten to 9 Nm (80 lb-in).
Install the exhaust Y-pipe. Refer to
Section 309-00
.
